My Escalation League Army Build Up Part 2

BLOGS FOR THE BLOG GOD!!!!

Okay so I've been a bit remiss about keeping up with my plan on the Escalation league. Unfortunately life has been keeping me busy and haven't had the time to keep on track with my army build up plan.


I do have some things to report though and of course some pictures for everyone to ooo and aaah at. Okay maybe complain about it being washed out or blurry.

Let me start off by saying... I hate painting red over white. I used the white so it picks out the detail better but man what a pain. I started out layering up Brick Red as a base for the red bits. This took about 3 to 4 coats on most areas, but some places required 6 layers. It was an interesting color to say the least, kind of had a purple hue to it, but it actually worked in the end.

Here's a mini with the first coat of Brick Red put on it. As you can see one coat allowed quite a bit of the white to show through. The Brick Red seemed to rub off quite easily too on the tips of the model. Just handling them caused a bit to rub off.

My next color I used to layer up was Reaper's Blood Red. It's a more vibrant red then the Brick Red, but not as bright as GW's Blood Red. I didn't get any pictures of the mini in this color but you'll see it on the Rhino below. This is close to a color between GW's Blood Red and Red Gore I think. Not too bad a color over all, but not as vibrant as the Blood Red from GW.


As you can see it's a nice red, I've left the Brick Red in some of the more recessed areas for shading. I really like how this Rhino is turning out, also like how the Berzerkers are turning out.

Unfortunately I didn't take into account the many layers of reds I would need. Even this Blood Red from Reaper still took several coats to cover up the Brick Red completely. I do have to say though I'm pleased overall with it, just wish I could find a short cut to save some time.



I'll have to look into that at a later time. To the right you see the Rhino with the final layer of red. I used Vallejo's Game Color Blood Red as I like their paints a little bit more then GW's.

I also used Brassy Brass from Vallejo and Tarnished Steel from Reaper as base coats for the other bits you see on the Rhino. I'll wash the brass with a brown/black ink wash I use for most of my metallic colors. I will also wash the tarnished steel and then use a chainmail color to highlight those. Same with the Brass color. I'll most likely just use the base color over top the washed brass first layer.

Half finished Berzerker

Below is the top down look on the Rhino from Steps 2 to 3 with the red colors. Second one is a bit blurry, sorry about that, but you can definitely see the color difference. I think an army that looks like this is going to be very sharp on the tabletop indeed.